Selling Parameters
Polyeposysuecinic Acid [PESA]
1,2,3-Benzotriazole [BTA]
Tolyltriazole [TTA]
Tolyltriazole 50% sodium salt
Sodium Bromide
1-Hydroxyethylidene-1,1-Diphosphonic acid [HEDP]
Sodium Salt of HEDP
Amino Tri(methylene Phosphonic Acid) [ A T M P ]
Sodium Salt of A T M P
2-Phosphonobutane-1,2,4-Tricarboxylic acid [PBTCA]
Diethylene Triamine Penta(methylene phosphonic acid) [DTPMPA]
Sodium Salt of DTPMPA
Sodium Salt of DTPMPA
Sodium Salt of Ethylenediamine Tetra(methylene phosphonic acid) [EDTMPS]
2-Hydroxy Phosphonoacetic Acid [HPAA]
Phosphino Carboxylic Acid [PCA]
Bis(hexamethylene) Triaminopenta(methylene-phosphonic acid)
[BHMTPMPA]
Potassium Salt of Hexamethylenediamine Tetra(Methylene Phosphonic acid)
[K6HDTMP]
Homopolymer of Maleic Acid [HPMPA]
Maleic Anhydride / Acrylic Acid Copolymer [MA/AA]
Sulphonated Polyacrylic Acid Copolymer [AMPS]
Polyamino Polyether Methylene Phosphonic Acid [PAPEMP]
2,2 dibromo-3-nitrilo propionamide Solution [DBNPA]
2,2 dibromo-3-nitrilo propion amide [DBNPA 99%]
2-n-octyl-4-isothiazolin-3-one [OIT]
4,5-dichloro-2-n-octyl-4-isothiazolin-3-one [DCOIT]
2-methyl-4-isothiazolin-3-one [MIT]
5-chloro-2-methyl-4-isothiazolin-3-one / 2-methyl-4-isothiazolin-3-one [CMI/MI]
++++++++++++++++ PRODUCT DETAILS ++++++++++++++++++++++
Product Name PESA
Chemical name Polyeposysuecinic Acid
Molecular Formular HO(C4H2O5M2)nH
Molecular weight 400-5000
Appearance Colorless or amble transparent liquid
Solid component 40.0% min.
Density (20C) g/cm3 1.2 min.
pH value (1% solution) 9.0-12.0
APPLICATIONS: This product is a multivariate antiscale and corrosive inhibitor with non-phosphor and non-nitrogen, it has good antisclae and dispersion performance to calcium carbonate, calcium sulfate, calcium fluoride and silica scale, with effects better than that of ordinary organophosphines. When built with organophosphates, the synergism effects are obvious.
This product has some effect of corrosive inhibitor, is a multivariate antiscale.
This product has good biodegradation properties, it can be widely used in circulating cool water system in situation of high alkaline, high hardness and high pH value. It can be operated under high concentration index. it has good compatible with chlorine, and other water treatment agents.
Package: 25kg/drum or by request, Storage for ten month in shady and dry place.
Note:
1. can be used in system of oilfield refill water, crude oil dehydration and boiler;
2. can be used in circulating cool water system of steel, petrochemical, power plant, medicine. Good compatibility with chlorine, the capability of antiscale won?t be affected by the content of chlorine. If used in the formulation of phosphonate as anticorrosive, it can sharply reduce the dosage of phosphonate, to lower the phosphoric content in the waste to be 1mg/L.
3. can be used in the boiler water, circulating cool water treatment, desalination plant, and membrane separation in situation of high alkaline, high hardness, high pH value and high concentration index.
4. can be used in detergent fields to produce detergent without content of phosphorus & nitrogen to prevent the pollution.
+++++++++++++++++++++++++++++++++++++++++
Product Name BTA
Chemical name 1,2,3-Benzotriazole
Molecular formula C6H5N3
Molecular weight 119.13
CAS No. 95-14-7
Appearance White crystals
Active Content 99.8% min.
chroma 30 max.
Melting Point 97.0C min.
Moisture 0.08% max.
Ash content 0.03% max.
Aqueous Ph 5.5-6.0
Solubility in Alcohol approximately transparent
Properties Soluble in alcohol, benzene, toluene, chloroform and DMF, slightly soluble in water, Turn red in air with oxidation, explosive in vacuum distillation.
APPLICATIONS: mainly used as antirust agent and corrosion inhibitor for metals .widely used in the antirust oil products such as gas phase corrosion inhibitor, in treating agent for recycling water, in antifreeze for cars antifogging for photograph, also used as stabilizer for macromolecular compound growth regulator for plant, lubricant additive, ultraviolet absorbent etc. It can be used together with many kind of scale inhibitors and bactericide and algaecide, show excellent anticorrosion effect in close recycling cooling water system.
Packing Net.25kgs/bag
+++++++++++++++++++++++++++++++++++++++++
Product Name TTA
Chemical name Tolyltriazole
Molecular formula C7H7N3
Molecular weight 133.15
CAS No. 29385-43-1
Appearance Light yellow to off -white granule or powder
PH 5.5-6.5
Assay 99.5% min.
Melting point 80-86C
Moisture 0.1% max.
Ash content 0.05% max.
APPLICATIONS: antirust and corrosion inhibitor, anti-fading for metal product, antiseptic and anticoagulant agent, anti-fogging for photograph, ultraviolet absorbent, anti-freezing agent, cycling cooling water treatment.
Package Fiber Drums or paper bag,
+++++++++++++++++++++++++++++++++++++++++
Product Name TTA 50% Sodium Salt
Product Name Tolyltriazole 50% sodium salt
Molecular formula C7H6N3Na
Molecular weight 155.13
CAS No. 64665-57-2
Chemical Structure
SPECIFICATIONS:
Appearance Clear,yellow to red brown solution
Active Content 49.5-51.0% min.
Chlorinity 100（ppm） max.
Free NaOH 0.5% max.
Free alkali 0.5% max.
pH value
(10% solution,20C ) 11.5-12.0
Density (20C) 1.186-1.196g/cm3
APPLICATIONS: antirust and corrosion inhibitor, anti-fading for metal product, antiseptic and anticoagulant agent, anti-fogging for photograph, ultraviolet absorbent, anti-freezing agent, cycling cooling water treatment
Package 230kgs net/drum 1200kgs/IBC
+++++++++++++++++++++++++++++++++++++++++
Product Name Sodium Bromide
Molecular formula NaBr
Molecular Weight 102.9
SPECIFICATIONS:
Appearance White crystal
Assay 99% min.
Degree of clearance Passed
Chlorides (as Cl) 0.1% max.
Sulphates (as SO4) 0.01% max.
Bromates (as BrO3) 0.003% max.
PH value 5.5~6.5
Moisture 0.5% max.
Heavy metals (as Pb) 0.0005% max.
APPLICATIONS: Industrial water treatment
Package Net.25kgs/drum
+++++++++++++++++++++++++++++++++++++++++
Product Name HEDP
Chemical name 1-Hydroxyethylidene-1,1-Diphosphonic acid
Molecular weight 206
CAS No. 2809-21-4
Common Name Dequest 2010, Briquest ADPA-60AW, Unihib 106
Chemical Structure
SPECIFICATIONS
Appearance Clear, Colorless to pale yellow aqueous solution
Active Content 60.0 - 62.0 %
Phosphorous acid (as PO33- ) 2.0% max
Phosphoric acid (as PO43- ) 0.8% max
pH (1% Water Solution) 2.0 max
Density (20C) g/cm3 1.430 - 1.460
Iron 10ppm max
Chlorides (as Cl-) 100 ppm max
Color (APHA) 30 max.
Ca sequestration (mg CaCO3/g ) 480 min
Acetic Acid 1.0% max
APPLICATIONS: can be wide used for industrial treatment water as corrosion and scale inhibitor, for example boiler water, cyclic cooling water and water of oil field. In addition, it is used as complexing agent in no cyanide electroplating, as metal cleaner and as stabilizer and fixation in blanch and dye industry. As the scale inhibitor ,it can well inhibit the scale of calium carbonate. The adding weight concentration of active ingredient is 1-10mg/l. It often cooperates with dispersion-scale inhibitor in the use.
Package In 250kg net Plastic Drum
IBC's can also be used as required
Note HEDP is available with lower Chloride level, lower Iron level, lower Arsenic level
HEDP is also available with its Sodium Salt solution or kalium salt solution
+++++++++++++++++++++++++++++++++++++++++
Product Name HEDPS(Na-4)
Chemical name Sodium Salt of
1-Hydroxyethylidene-1,1-Diphosphonic acid
Molecular weight 294
CAS No. 3794-83-0
Common Name Dequest 2016
SPECIFICATIONS
Appearance Clear, Colorless to pale yellow aqueous solution
Active Content 22.0-24.0% as acid
32.0-34.0% as salt
PH (1% water solution) 10.0-12.0
Density (20C) g/cm3 1.31min.
Iron (as Fe) 20ppm max.
Color (APHA) 80max.
APPLICATIONS: It is mainly used as a Scale & Corrosion Inhibitor, chelating (Sequestrating), deflocculating agent in Cooling and Boiler water treatment, Textile Dying, Detergents etc.
Package In 250kg net Plastic Drum
IBC's can also be used as required
Note Also available dry powder form
+++++++++++++++++++++++++++++++++++++++++
Product Name ATMP
Chemical name Amino Tri(methylene phosphonic acid)
Molecular weight 299
CAS No. 6419-19-8
Common Name Dequest 2000, Briquest 301-50A, Unihib 305
Chemical Structure
SPECIFICATIONS
Appearance Clear, colorless to pale yellow aqueous solution
Active Content 50.0 - 52.0 %
Phosphorous acid (as PO33- ) 4.0% max
Phosphoric acid (as PO43- ) 0.8% max.
Chloride (as CL- ) 1.0% max
pH (1% Water Solution) 2.0 max
Density (20C) g/cm3 1.31 - 1.35
Iron 10.0ppm max.
Ca sequestration mg CaCO3/g 400 min.
APPLICATIONS: It is mainly used as Scale & Corrosion Inhibitor, Peroxide Stabilizer in Cooling and Boiler Water Treatment, Textile Dying etc
Package In 250kg net Plastic Drum
IBC's can also be used as required
Note ATMP is also available as its Sodium Salt solution.
+++++++++++++++++++++++++++++++++++++++++
Product Name ATMPS(Na-5)
Chemical name Sodium Salt of Amino Tri(methylene phosphonic acid)
Molecular weight 409
CAS No. 2235-43-0
Common Name Dequest 2006
Chemical Structure
SPECIFICATIONS
Appearance Clear, Colorless to pale yellow aqueous solution
Active Content 28.0-32.0% as acid
38.0-42.0% as salt
Chloride (as CL- ) 1.0%max.
PH (1% water solution) 10.0-11.0
Density (20C) g/cm3 1.43min.
Iron 20.0ppm max.
APPLICATIONS: It is mainly used as a Scale & Corrosion Inhibitor, Peroxide Stabilizer in Cooling and Boiler Water Treatment, Textile Dying etc.
Package In 250kg net Plastic Drum
IBC's can also be used as required
Note Also available dry powder form
+++++++++++++++++++++++++++++++++++++++++
Product Name PBTCA
Chemical name 2-Phosphonobutane-1,2,4-Tricarboxylic acid
Molecular weight 270
CAS No. 37971-36-1
Common Name Bayhibit AM, Dequest 7000
Chemical Structure
SPECIFICATIONS
Appearance Clear, Colorless to pale yellow aqueous solution
Active Content (as PBTC) 50% min.
Phosphorous acid (as PO33-) 0.5% max
Phosphoric acid (as PO43- ) 0.2% max
pH (1% water solution) 1.5 - 1.9
Density (20C) g/cm3 1.27 - 1.31
Iron 10 ppm max
Chlorides 10 ppm max
APPLICATIONS: widely used as corrosion and scale inhibitor in cyclic cooling water system and filling-water of oil. Particularly, they suit water treatment that possess high-temperature, hardness, high PH value and so on. They can also be used to intenerate boiler water and remove the sale of seawater and disperse and inhibit scale of coal gas washing in steel-making.
Package In 250kg net Plastic Drum
IBC's can also be used as required
+++++++++++++++++++++++++++++++++++++++++
Product Name DTPMPA
Chemical name Diethylene Triamine Penta(methylene phosphonic acid)
Molecular weight 573
CAS No. 15827-60-8
Common Name Dequest 2060S
Chemical Structure
SPECIFICATIONS
Appearance Clear, Dark amber solution
Active Content 49.0 - 51.0 %
Phosphorous acid (asPO33-) 5.0% max
pH (1% water solution) 2.0% max
Density (20C) g/cm3 1.35 - 1.45
Ca Sequestration 450 min
APPLICATIONS: It is mainly used as Chelating (Sequestrating) agent, Peroxide Bleach Stabilization.
Package In 250kg net Plastic Drum
IBC's can also be used as required
Note DTPMPA is also available with its Sodium Salt solution
+++++++++++++++++++++++++++++++++++++++++
Product Name DTPMPS (Na-2)
Chemical name Sodium Salt of Diethylene Triamine Penta(methylene phosphonic acid)
CAS No. 22042-96-2
Molecular Weight 617
Common Name Dequest 2066A
SPECIFICATIONS:
Appearance Clear, Dark amber solution
Active Acid 45.0% min.
Phosphorous acid (as PO33-) 5.0% max.
pH (1% water solution) 2.0-3.0
Density (20C) g/cm3 1.37-1.43
Iron (as Fe) 20ppm max.
Ca Sequestration 450min.
APPLICATIONS: It is mainly used as Chelating (Sequestrating) agent, Peroxide Bleach Stabilization
Package Normally In 250kg net Plastic Drum, IBC's can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name DTPMPS (Na-7)
Chemical name Sodium Salt of Diethylene Triamine Penta(methylene phosphonic acid)
CAS No. 22042-96-2
Molecular Weight 727
Common Name Dequest 2066
SPECIFICATIONS:
Appearance Clear, Dark amber solution
Active Content 24.0-26.0% as acid
30.5-33.0% as salt
pH (1% water solution) 6.0-8.0
Density (20C) g/cm3 1.29min.
Chlorides (as CL) 5.0% max.
Iron (as Fe) 20ppm max.
APPLICATIONS: It is mainly used as Chelating (Sequestrating) agent, Peroxide Bleach Stabilization
Package Normally In 250kg net Plastic Drum, IBC's can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name EDTMPS
Chemical name Sodium Salt of Ethylenediamine Tetra(methylene phosphonic acid)
CAS No. 15827-60-8
Molecular Weight 546
Common Name Dequest 2046
SPECIFICATIONS:
Appearance Pale-yellow Aqueous solution
Active Content 30.0-32.6% as salt
24.0-26.0% as acid
pH (1% water solution) 6-8
Iron (as Fe) 20ppm max.
Chlorides (as CL-) 5.0% max.
Density (20C) g/cm3 1.30-1.40
APPLICATIONS: It is mainly used as Chelating (Sequestrating) agent, Peroxide Bleach Stabilization
Package Normally In 250kg net Plastic Drum, IBC?s can also be used as required
+++++++++++++++++++++++++++++++++++++++++
Product Name HPAA
Chemical name 2-Hydroxy Phosphonoacetic Acid
CAS No. 15827-60-8
Molecular Weight 156
Common Name Belcor 575
Structure
SPECIFICATIONS:
Appearance Dark brown liquid
Solid Content 48.0 ~ 52.0%
Phosphorous Acid (as PO33-) 5.0% max
pH Value(1% solution) 1.0 ~ 3.0
Density (20C), g/cm3 1.35 ~ 1.42
APPLICATIONS: It is mainly used as Scale & Corrosion inhibitor in cooling & boiler water treatment.
Package Normally In 250kg net Plastic Drum, IBC's can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name PCA
Chemical name Phosphino Carboxylic Acid
CAS No. 71050-62-9
Common Name Belsperse 164
Chemical Structure
SPECIFICATIONS:
Appearance Colorless liquid
Solid Content 37.5-42.5%
pH Value (Undiluted) 3.5-4.5
Density (20C), g/cm3 1.20-1.24
Content (as P) 0.8
APPLICATIONS: Sludge dispersant, Dispersant in de-inking, Paper machine deposit control
Package Normally In 200-230kg net Plastic Drum, IBC's can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name BHMTPMPA
Chemical name Bis(hexamethylene) Triaminopenta(methylene-phosphonic acid)
CAS No. 35657-77-3
Common Name Dequest 2090
SPECIFICATIONS:
Appearance Dark amber solution
Active Content 45%
Chlorides (as CL-) 6.0% max
pH Value (1% Solution) 3.0 - 4.0
Density (20C), g/cm3 1.28 - 1.38
Iron (as Fe) 65 ppm max
APPLICATIONS: It is mainly used in Oilfield water treatment.
Package Normally In 250kg net Plastic Drum, IBC's can also be used as required.
Note pH Value 2 max. & Dequest 2096 is availbale
+++++++++++++++++++++++++++++++++++++++++
Product Name K6HDTMP
Chemical name Potassium Salt of Hexamethylenediamine
Tetra(Methylene Phosphonic acid)
CAS No. 38820-59-6
Common Name Dequest 2054
SPECIFICATIONS:
Appearance Clear, Colorless to pale yellow aqueous solution
Active Content 21.0 - 24.6% as acid
31.0 - 36.0% as salt
Chlorides (as CL-) 4.0% max
pH Value (1% Solution) 6.0 - 8.0
Density (20C), g/cm3 1.26 min
Iron (as Fe) 35 ppm max
APPLICATIONS: It is mainly used in Boiler treatment, reverse osmosis.
Package Normally In 250kg net Plastic Drum, IBC?s can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name HPMA
Chemical name Homopolymer of Maleic Acid
CAS No. 26099-09-2
SPECIFICATIONS:
Appearance Clear, Amber aqueous solution
Solid Content 48.0 - 52.0%
pH Value (1% Solution) 2.0 - 3.0
Density (20C), g/cm3 1.18 -1.24
APPLICATIONS: It is mainly used in Cooling Water Treatment, Boilers, evaporators, RO membranes, secondary oil recovery.
Package Normally In 220 - 250kg net Plastic Drum, IBC's can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name MA / AA
Chemical name Maleic Anhydride / Acrylic Acid Copolymer
Common Name Belclene 283
SPECIFICATIONS
Appearance Clear, Light Amber aqueous solution
Solid Content 48.0 - 52.0%
pH Value (1% Solution) 2.0 - 3.0
Density (20C), g/cm3 1.18 -1.24
APPLICATIONS: It is mainly used in Cooling Water Treatment, Boilers, evaporators, RO membranes.
Packing Normally In 220 - 250kg net Plastic Drum, IBC's can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name AA/AMPS
Chemical name Sulphonated Polyacrylic Acid Copolymer
Molecular formula
Molecular weight
CAS No. 40623-75-4
Chemical Structure
SPECIFICATIONS:
Appearance Colorless to pale yellow clear solution
Solid Content 39.0 - 44.0%
pH Value (1% Solution) 3.5 - 4.5
Density (20C), g/cm3 1.18 -1.24
Viscosity (cps at 25C) 90-150
APPLICATIONS: It is mainly used in Cooling Water Treatment, Boilers, RO membranes.
Package In 200 - 230kg net Plastic Drum, IBC's can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name PAPEMP
Chemical name Polyamino Polyether Methylene Phosphonic Acid
Molecular Weight 600-630
SPECIFICATIONS:
Appearance Pale yellow to aqueous solution
Actire Content (as PAPEMP) 32.0%min
Phosphorour acid (as PO33- ) 4.0%max
pH (1% water Solution) 2.0 ? 4.0
Density (20C), g/cm3 1.24min
APPLICATIONS: It is our new water treatment chemical, mainly used as Scale & Corrosion Inhibitor especially in cooling and Boiler water treatment with the water quality of high alkali, high hardness & high PH level.
Package Normally In 200 - 250kg net Plastic Drum, IBC's can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name DBNPA
Commercial name Hencide DB 20%
Chemical name 2,2 dibromo-3-nitrilo propionamide Solution
Molecular formula C3H2BR2N2O
Molecular weight
CAS No. 10222-01-2
SPECIFICATIONS:
Appearance Colorless- Pale Yellow Liquid
Active Content 20 - 22%
Specific Gravity 1.23-1.28
pH (10% solution) 4.5 - 5.5
Glycol (PEG, PG) 40 - 60 %
Water 20 - 40%
APPLICATIONS: It is used as anti-microbial agent, controlling bacterial, fungal and algal growth in industrial water systems like cooling towers, pulp and paper mill process water, oil-recovery systems and air-conditioning systems.
Package NET.250KGS/DRUM
+++++++++++++++++++++++++++++++++++++++++
Product Name DBNPA (crystal)
Chemical name 2,2 dibromo-3-nitrilo propion amide
Molecular formula C3H2BR2N2O
CAS No. 10222-01-2
SPECIFICATIONS:
Appearance White Crystalline powder
Content 99.0% min
Melting Point : 124.0-126.0C
Mositure % 0.5% max.
MDBNPA 1.0% max.
Solubility test in 35%DEG No insoluble substance
PH Value(1% aqua) PH4.0-6.0
Color Number ≤50 Pt-CO #
Colorless or pale yellow clear liquid
APPLICATIONS: It is used as anti-microbial agent, controlling bacterial, fungal and algal growth in industrial water systems like cooling towers, pulp and paper mill process water, oil-recovery systems and air-conditioning systems.
Package Normally in 25kgs net fibre Drum, other packing can also be used as required.
+++++++++++++++++++++++++++++++++++++++++
Product Name OIT
Chemical name 2-n-octyl-4-isothiazolin-3-one
Molecular formula C11H19NOS
Molecular weight 213.3
CAS No. 26530-20-1
SPECIFICATIONS
Appearance Clear, yellow liquid
Content (HPLC) 98%
PH (1% water solution) 3 min.
Specific Gravity (at 25 Deg.) 1.01-1.05g/cm3
APPLICATIONS: The product is recommended for a wide range of applications including adhesives, polymer emulsions, decorative wood stains, sealants, pulp, fountain solutions, MWF and paint where protection against fungi and bacteria is required in the wet state.
Package NET.200KGS/DRUM
+++++++++++++++++++++++++++++++++++++++++
Product Name DCOIT
Chemical name 4,5-dichloro-2-n-octyl-4-isothiazolin-3-one
Molecular formula C11H17NOSCl2
Molecular weight 282.00
CAS No. 64359-81-5
SPECIFICATIONS:
Appearance White to light yellow powder
Active Content 95%
Melting Point 44 Deg.
APPLICATIONS: Mainly used in Marine Antifouling coatings and paints.
Package 30 kgs/FD
+++++++++++++++++++++++++++++++++++++++++
Product Name MIT
Chemical name 2-methyl-4-isothiazolin-3-one
Molecular formula C4H5NOS
Molecular weight 115.14
CAS No. 2682-20-4
SPECIFICATIONS:
Appearance Brown yellow liquid
Active Content 50%
PH (1% water solution) 2.6-6.5
Specific Gravity (at 20 Deg.) 1.15-1.25g/cm3
Density (25C) g/cm3 1.10
APPLICATIONS: Aqueous preservative is hightly active, broad-spectrum antimicrobial agent that does not contain CMIT. It has excellent chemical stability and remains active over a broad PH range between 1.5-10.5. It is highly safe because it does not contain chlorine and it nonmutagenic in Amestest. It is quite useful for use in latex emulsions, paint emulsions, metal working fluids, adhesives, aqueous slurries and other fields.
Package 25 and 200 kg plastic containers
+++++++++++++++++++++++++++++++++++++++++
Product Name CMI / MI
Chemical name 5-chloro-2-methyl-4-isothiazolin-3-one(CMIT)
/ 2-methyl-4-isothiazolin-3-one (MIT)
Molecular formula C4H4ClNOS / C4H5NOS
Molecular weight 149.5 / 115
CAS No. 26172-55-4 / 2682-20-4
SPECIFICATIONS:
Appearance Light yellow liquid
Total Active Content (HPLC) 14% min.
PH (Non-diluted) 4 max.
Specific Gravity (at 25 Deg.) 1.25g/cm3 min.
pH value(25C) 2.0-4.0
CMI:MI (w/w) 2.5-4.0
APPLICATIONS: It is wide used for industrial cooling water, filling-water of oil field and lines of papermaking, coating, paint, latex and so on.
Package 25kg, 200kg and 1000kg impervious plastic containers.
Note Active contain to be 1.5%, 3%, is availble
+++++++++++++++++++++++++++++++++++++++++
China (Mainland)
