Selling Parameters
Uncalcined Mica paper is made by hydraulic separation process using the best quality of muscovite ,phlogopite or synthetic mica, which is first reduced to pulp and then made into the form of paper in rolls . It mainly used for all kind of mica sheet and mica tape.
Availability
Width:900-1040mm,Thickness:0.05-0.30mm,
Inside diameter of pater spool:76-152mm,
Packing:In wooden case with contents wrapped up in plastic film.
Typical Properties
Type | Per unit area (g/m2) | Thickness(mm) | Penetr- ation ≤(S) | Dielectric strength average(KV/mm) | Conductivity of the extract aqueous≤ (10-6S/cm) | Loss due to heating at 500.C ≤(%) | Tensile strength ≥(N/cm) |
MPM3-b (505) | 50±4% | 0.035±4% | 6 | 15 | 10 | 0.4 | |
80±4% | 0.055±4% | 8 | 15 | 8.4 |
95±4% | 0.065±4% | 8 | 15 | 10.4 |
110±4% | 0.075±4% | 12 | 15 | 11.4 |
125±4% | 0.085±4% | 14 | 15 | 11.7 |
145±4% | 0.095±4% | 25 | 15 | 12.0 |
165±4% | 0.110±4% | 28 | 15 | 12.5 |
240±5% | 0.150±4% | 40 | 15 | 13.0 |
300±5% | 0.200±4% | 90 | 15 | 14.0 |
MPM3-L1 (506) | 50±4% | 0.035±4% | 6 | 16 | 9 | 0.4 | 3.0 |
65±4% | 0.045±4% | 8 | 16 | 3.5 |
80±4% | 0.055±4% | 15 | 16 | 3.5 |
100±4% | 0.065±8% | 20 | 16 | 3.5 |
120±5% | 0.075±8% | 25 | 16 | 4.0 |
150±5% | 0.095±8% | 30 | 16 | 4.5 |
160±5% | 0.100±8% | 35 | 16 | 5.0 |
180±5% | 0.110±8% | 40 | 16 | 5.0 |
200±5% | 0.120±8% | 45 | 16 | 5.5 |
250±5% | 0.150±8% | 70 | 16 | 6.5 |
320±5% | 0.200±8% | 85 | 16 | 7.0 |
400±5% | 0.250±8% | 115 | 16 | 7.5 |
500±5% | 0.300±8% | 350 | 16 | 8.5 |
MPM3-L2(507) | 80±4% | 0.052±6% | 8 | 16.5 | 9 | 0.4 | 3.5 |
90±4% | 0.060±6% | 10 | 16.5 | 3.5 |
120±5% | 0.075±6% | 12 | 16.5 | 3.5 |
160±5% | 0.100±7% | 17 | 16.5 | 4.0 |
180±5% | 0.110±7% | 25 | 16.5 | 4.5 |
200±5% | 0.120±7% | 30 | 16.5 | 4.5 |
225±5% | 0.132±7% | 40 | 16.5 | 5.0 |
270±5% | 0.165±7% | 65 | 16.5 | 5.5 |
MPP4(P506) | 50±5% | 0.035±6% | 6 | 14 | 9 | 0.4 | 2.5 |
80±5% | 0.050±6% | 8 | 14 | 3.0 |
90±5% | 0.055±6% | 9 | 14 | 3.0 |
100±5% | 0.065±8% | 15 | 14 | 3.5 |
130±5% | 0.085±8% | 40 | 14 | 4.5 |
170±5% | 0.100±8% | 50 | 14 | 4.5 |
250±5% | 0.150±8% | 100 | 14 | 5.0 |
350±5% | 0.220±10% | 130 | 14 | 7.5 |
450±5% | 0.275±10% | 180 | 14 | 8.5 |
MPS5(S506) | 80±4% | 0.055±7% | 8 | 14 | 11 | 0.4 | 2.5 |
105±4% | 0.070±7% | 10 | 14 | 3.0 |
120±4% | 0.080±7% | 12 | 14 | 3.5 |
135±4% | 0.090±7% | 13 | 14 | 3.5 |
160±4% | 0.110±7% | 18 | 14 | 3.5 |
195±4% | 0.120±7% | 25 | 14 | 4.0 |
506-D | 120±4% | 0.073±5% | 14 | 18 | 16 | 0.4 | 4.0 |
160±4% | 0.102±5% | 25 | 18 | 5.0 |
180±4% | 0.115±5% | 32 | 18 | 6.0 |
Company Profile
Anping County Meikaida Metal Mesh Co., Ltd. is sited in Anping County of Hebei Province, which is the famous Wire Mesh Land of China. This Company has strong R&D capability, first-class production equipment and advanced inspection devices. We seek first-class management and have built complete quality management system following the standard of ISO9002 quality management standard. 90% of our metal products are for export to Japan, the USA, Korea and some other countries. meikaida is professional engaged in production of stainless steel wire mesh series products and wire mesh for constructions series products, mainly includes Stainless Steel Wire Mesh, square wire mesh, crimped wire mesh, wire mesh panels, angle bead, wire mesh for brick constouction?high ribbed formwork expanded wire mesh etc. Our products are widely used in petroleum, chemical, construction, textiles, medicine, airspace, expressway, highway, railway, garden fencing, breeding, metallurgy and machinery.