Jaw crusher description:
Jaw crusher is mainly used to crush kinds of mining stone primarily, and the largest compression resistance of the material to be crushed is 320MPa. The jaw crusher is widely used in stone mining, metallurgy industry, building material, highway, railway, and chemical industry.
jaw crusher data:
Model
Max.feed size
(mm)
Adujusting of dischange opening(mm)
Capacity
(t/h)
Power
(KW)
Weight
(T)
PE-150×250
125
10-40
0.6-3
5.5
0.81
PE-200×300
180
10-40
1.5-6
7.5
0.9
PE-250×400
210
20-60
3-13
15
2.8
PE-400×600
340
40-100
10-34
30
6.5
PE-500×750
425
50-100
20-52
55
10.3
PE-600×750
500
150-200
50-100
55
12
PE-600×900
500
65-160
30-75
55-75
15.5
PE-750×1060
630
80-140
72-130
110
28
PE-800×1060
640
100-200
85-143
100
30
PE-900×1060
685
230-290
100-250
110
31
PE-900×1200
750
95-165
87-164
110
50
PEX-150×750
120
18-48
5-16
15
3.5
PEX-250×750
210
25-60
8-22
22
4.9
PEX-250×1000
210
25-60
10-32
30-37
6.5
PEX-250×1200
210
25-60
13-48
45
7.8
PEX-300×1300
250
25-90
16-65
75
11
Jaw crusher working principle:
The motor transmits power through belt, drives the moving jaw do periodic motion to the fixed jaw surround the eccentric shaft.The angle between toggle plate and moving jaw increases when moving jaw moves up. So the moving jaw closes to the fixed jaw. The stuff will be crushed in this process. The angle between toggle plate and moving jaw decreases when moving jaw moves down, the moving jaw moves awavy from fixed jaw by the pulling of rod and spring, the products such as stone after crushing will be discharged from the outlet.