Jacket glass reactor system
1. volume:1L 2L 3L 5L 10L 20L 30L 50L 80L 100L
2. Reacting tem:-80 deg ~300 deg
3. GG17, SS,PTFE sealing
4. University brands designated
5. Explosion-prood device is optional
6. Ac motor,brushless,no sparkle
7. Constant rotationg speed
8. Reflow and distillation system
9.chemical laboratory use
10.reaction mixing vessel
the special properties of glass reactors
1. glass reactor adopts AC frequency control of motor speed So the rev is steady , no spark appear, wide moment, safe, and can be used as the constant working.
2. glass reactor system use PTFE composite seal, it can maintain high vacuum degree.
3. glass reactor system use efficient condenser to ensure high recovery rate.
4. The complete set of double-layer glass use GG17 high borosilicate glass with good chemical and physical properties. The thickness of the glass is 5-7 mm with good chemical and physical properties
5. The glass inter layer interface is added with hot oil, through the loop, it can do reaction under the condition of high temperature; the glass inter layer interface added with cooling fluid can carry on reaction under the condition of low-temperature.
6. the double-layer glass reactor system can be added with tap water to quickly take away reaction heat.
7. Double-layer glass reactor discharged material has flanged opening and PTFE valve, without dead angle inside the container, it can be demounted to facilitate the discharge of solid materials.
8. Double-layer glass reactor have digital mixing motor, frequency conversion control, matched with a torque increasing of reducer.
9. Double-layer glass reactor system reasonable structure and selected materials. The mechanical components use stainless steel and aluminum-alloy pieces, the glass pieces use high borosilicate glass with high temperature resistance and good chemical properties. Electrical components parts: the main components use original imported devices.
10. Double-layer glass reactor’s cover opening design: constant pressure hopper opening (or as inlet), condensation reflux inlet, thermometer bushing opening, solid feeding opening (or as outlet) and mixing opening.
11. the range of glass reactor stirring rate is 10-1100 r/min.
12. The gas can be condensed through condenser system.ï¼or release valve.
13. control its pressure inside, by vacuum pump or pressure pump. But the price of pump is additional. Now , the glass reactor was had a pressure gauge, can display the pressure value, but there is no way to charge into the positive pressure or negative pressure, but only display pressure.
14. Toption’s glass reactor is thermoresistant material. Glass material is G3.3, and extreme temperatures: low temperature to -80 deg and high temperature to 300 deg..
The function of glass reactors system
The double-layer glass reactor system realizes “one reactor severs several purposes” in the experiment, satisfying diversify of aspects of different tests. It can be used for the following reactions:
1. Vacuum stirring reaction
2. High-temperature and low-temperature reaction
3. Constant speed running mixing reaction
4. Distillation , refluence and condensation reaction.
5. Negative pressure operation and separation
6. To do the rectify through assembling the rectifying pillar. Realize Reflow and distillation.
7. Assembly the production line in accordance of the specific demands. Customize new products based on clients’ different demands.
type
volume
(L)
Motor power
(W)
Speed
(r/min)
Stirring torque(1300r/min)
Inside/outside tube diameter
(mm)
Reactor vessel cover relevant opening size
center
left
right
later
before
TOP-5L
5
90
100-1300
5000g.cm
200*230
50#
29#
24#
24#
19#
TOP-3L
3
90
5000g.cm
200*230
50#
29#
24#
----
19#
TOP-2L
2
90
5000g.cm
150*180
50#
29#
24#
----
14#
TOP-1L
1
40
2400.g.cm
150*180
50#
29#
24#
----
14#