FU Series Chain Conveyor

The Brief Introduction of FU Series Chain Conveyor:

This Series conveyor to a U-shaped scraper chain of traction, transportation granular, powder and other materials, with a good seal, transmission low energy consumption, long service life, transmission capacity, low noise, installation and maintenance easy, two-way Operating characteristics, widely used in building materials, mining, metallurgical and other industries.

The Materials that will be processed in the FU series chain conveyor have the properties of internal friction and side pressure, and the movement of chains makes internal pressure of materials and internal friction of grains increase in the trough. When internal friction among material layers is more than external friction between materials and trough wall, materials will flow forwardly along with chains like water. When the specific value between material layers' height and trough's width satisfies certain conditions, stable materials flow can be formed. Advanced principle, good design and manufactural technology ensure the excellent properties of this conveying equipment.

The Features & Technical requirements of FU Series Chain Conveyor:

1. Powder or fine grained balk cargo of the conveyor can be transported horizontally or with less than or equal to 30'angle of inclination.
2. Good capacity, which can reach 1 5-600 m3/h.
3. The conveyor  has long transporting distance, and the maximum of single conveyor can reach about 60m.
4.The operating cost and maintain rate is low.
5. It's flexible to feed and discharge in multi-point and technical arrange.6. It has long lifetime. Normal lifetime of chains is more than 5 years, and the lifetime of rollers is equal or more than 2 or 3 years.
7. The chain conveyor can transport in two-way, and also can be arranged on the gantry, ground and pit.
8. Omniseal casing is semlessly for dust. It's safe to operate it. It's reliable for environment.
9.  The power comsumption is low, it can reduce 40%-60% in comparision with screw conveyor.

 

The Technical Parameters of FU Series Chain Conveyor: 

 Specification

Channel width

(mm)size (mm)10% Max. size (mm)Max. conveying inclination (°C)Capacity (m3 /h)

Moisture**

（%）Chain speed (m/min)10---25FU150150＜4＜8   ≤156-----23   ≤5FU200200＜5＜1012---40FU270270＜7＜1521-----75FU350350＜9＜1840----125FU410410＜11＜2155-----150FU500500＜13＜2580-----225FU600600＜15＜30115-----300

Introduction of Rotary Kiln :<a href="http://www.cement-equipment-kf.com" title="Rotary kiln"> Rotary kiln </a>is the main equipment of calcining cement clinker.The drying machines are used to heat solids to the point where a required chemical reaction(s) takes place. The <a href="http://www.cement-equipment-kf.com" title="Rotary kiln"> Rotary kiln </a> is basically a rotating inclined cylinder. Solids retention time in the kiln is an important design factor and is set by proper selection of the diameter, length, speed, slope and internals design. There are two basic types of rotary kilns; direct fired and indirect fired.The dryer is used in the cement plant to calcine high grade cement, at the same time can be used in metallurgy,chemical,construction ect.Our <a href="http://www.cement-equipment-kf.com" title="Rotary kiln"> Rotary kiln </a> system is after technology innovation, being used in the most advanced hydraulic gear wheel device, the metering piston pump of high precision, the high precision control valve and contact graphite blocksealing devices and other advanced technologies. It features in easy to operate and operational safety. Compared with the same specification equipment, the rotary kiln stabilizes the thermal system program and improves the equipment operation rate, with the operation rate increased by 10%, the yield increased by 5% -10% and heat consumption reduced by 15%.Kefan designs and supplies both direct fired and indirect fired rotary kilns for a wide variety of applications. We have supplied over a thousand rotary kilns ranging in size up to 7.6 meters in diameter and 190 meters in length.Therefore, we can provide repair parts to the original tolerances and specifications and take advantage of the latest designs and improvements.