Electric Forklift

Rated load capacity(kg)

              2000                         

Load center(mm)

500

Max. Lifting height(mm)

3000

Fork tilt(F/R)(deg)

6º/6º

Min. Turning radius(mm)

1590

Max.Traveling speed(km/h)

18

Dimension

Length (to fork end)(mm)

1965

Width(mm)

1080

Canopy guard height(mm)

1975

Min.mast height(mm)

1990

Wheel tread(mm)

890

Wheel base(mm)

1310

Fork (L*W*H)(mm)

40*100*920

Fork adjusting range (min./max.)(mm)

200/920

Weight(kg)

3035

Tire

Front tire(mm)

18*7.8

Rear tire(mm)

16*6.8

Power System

Battery voltage/capacity(V/Ah)

48/420

Controlling system

AC frequency conversion control

SAFE OPERATION

Fork Horizontal Control (Optional)

When the fork is working, it can be kept at the horizontal position, easy for loading or unloading goods.

The working efficiency is greatly improved.

 

Speed Control Function (Optional)

The mast’s tilt speed and forklift’s travel speed will be controlled when the mast is at high goods alloca-

tion, improving the operation security.

 

Fork Lockup Function (Optional)

Whether the starting switch is on or off, the fork will be locked when the driver is not on the seat, so that

the mistaken operation is avoided. 

 

SAFE DRIVING

Induction Device

If the driver leaves the seat during traveling or in the case of incorrect sitting position, the forklift will auto

matically stop unloading or traveling.

 

Steering Synchronization System (Optional)

The steering synchronization ensures smooth steering and easier operation.

 

Speed Control at Sharp Turn (Optional)

The traveling speed will be automatically controlled in the case of sharp turn,

and the steering device is locked.

 

Automatic Load Measurement (Optional)

The lifting system will automatically measure the load, if the measured load exceeds the rated load,

it will give an alarm.

 

Reliable Accelerator

Build-in safety switch ensures safe traveling and breaking. More than 10 million times working life

makes the forklift more reliable.

 

Emergency Stop Button

Cut off the power in the emergency case.

 

SAFE PROTECTION

High Strength and Overall Pressing Canopy Guard

The canopy guard applies overall pressing and the front/rear column applies irregular section steel.

The integrated intensity is strengthened and the forklift looks more beautiful.

 

Cushion Control Function-lift (Optional)

When the fork drops to the ground or rises to the top, the cushion device

will effectively prevent the service wear.

 

Cushion Control Function (Optional)

When the fork drops to the ground or rises to the top, the cushion device

will effectively prevent the service wear.

 

Neutral Gear Locking

Start the forklift only when it keeps in the neutral position.

 

Safety Indication Lamps

Eye-catching safety indication lamps ensure safe traveling.

 

ERGONOMICS

Simple and Multifunctional Operation Panel

Read the operation information clearly and easily on the multifunctional LCD panel.

 

Super-wide Vision

The lift cylinder is installed behind of the mast. This optimal design successfully widens both the

mast’s width and driver’s vision.

 

Excellent All-round Visibility

Simple and clear operation panel ensures excellent all-round visibility for the driver.

 

Adjustable Steering Column

The inclination angle of steering column could be adjusted to give the driver the most comfort.

 

Commodious Cab

The cab is expanded due to the arc design of front/rear column. The driver will feel more

comfortable in case of long-time operation.

 

Wide Entrance and Low Pedal

The wide entrance and low pedal make it easier to get on/off the forklift,

especially in the case of busy operation.

 

Pivot Turn Device

Applying the new type of dual-drive AC motor, the two drive units steer at the opposite direction,

so that pivot turn is realized.

 

Comfortable Suspended Seat

Appling the new type of suspended seat, adjust the bearing capacity according to the weight,

and provide the most comfort. The moving range is as for as 150mm.

 

Foot Brake System

Step on the brake to stop the forklift and then unlock it by another step. It is very convenient and

no need to change the sitting position.

 

Fingertip Control System (Optional)

Advanced intelligent fingertip control system, adjust the forklift specifications according to the

driver’s stature and provide the most comfort. The working efficiency, as well as the energy

use ratio is greatly improved.

 

EASY MAINTENANCE

Lower Maintenance Cost

Applying the new generation AC driving motor, there is no need of carbon brush or changing

the easy wearing parts. So the maintenance cost is greatly reduced.

Zhejaing Fd Electric Stacker Manufacturing Co.,Ltd. covers an area of more than 10,000 square meters. the company is specialized in electric, hydraulic tools, one of the manufacturers warehouse handling. The main products include: electric pallet truck series, forklift truck series, platform truck series, drums car series, agricultural electrical machinery, container handling equipment and aerial work platforms. The company in product design, product quality has a considerable development. The company also focus on the development of new products and opening a hair, in recent years developed a series of leading new products. the company has advanced CNC machining center, digital sheet metal cutting machines, professional paint spraying lines. For the quality of the products provide a guarantee. the companyforce many famous enterprises and foreign business to establish long-term cooperation relationship. In addition to standard products, the ability the companyaccording to the requirements of customers design and manufacture of special equipment or OEM can also provide customers a full range of accessories and the appropriate technical support. the companyin the capacity of all staff's efforts, look to the future, and domestic and foreign customers, partners, hand in hand for a better tomorrow.