Main features :
1ã Several significant computer control parameters
2ã Customized frame high-strength easily adjusted to facilitate the demolition of the end of major leakage
3ã Enclosed circular wall to avoid the wall flowers
4ã Cotton feeding or apply double lap ï¼
5ã Plane intermittent smoke machine Filtration box-absorption ï¼
6ã Flat reversed carding enhance and improve network quality cotton ï¼
7ã Flat located and fixed before carding plate cylinder Astoria structural optimization and design to improve accuracy ï¼
8ã Flat spent on removing replaced by the roller brush to get copied ï¼
9ã Plane using new Rack ï¼
10ãConvenient and safe all closed security enclosures ï¼
11ãBrake Cylinder 40 seconds ï¼
12ãSince stopped everywhere everywhere Detecting Device ï¼
13ãCotton can visit the band network installation guide cotton ã
Selection ï¼
Autoleveller : Self-Leveling mixed ring by measuring the thickness and the amount of litter feeding thickness of cotton cotton controlled by computer to speed roller achieve fragment length Leveling.
Blowing - carding blowing-carding applicable to high-yield high-speed card : None ã
Electrical Control ï¼
1ãFA006 Card electrical control box two sets of import-frequency devices and variable speed motor control Astoria and cotton transmission ratio. Acceleration and smooth stable and reliable operation and good braking performance.
Leveling also wearing self-regulating control cabinet which guarantee of evenness.
2ãControl panel is equipped with a digital display device the box can show all kinds of dynamic information technology and is able to make all kinds of breakdowns and full extinguishers state police. The Control Center is a piece of imports PLC simple and reliable operation.
3ã Technical specifications ï¼
ï¼1ï¼Scope : The overall length of 22-76 mm machine applicable to the cotton fiber chemical fiber and its blended.
ï¼2ï¼ Yield (kg / am) ï¼80(Maximum speed of 250 out of the folds)
ï¼3ï¼ Quantitative sliver ï¼3.5-6.5(G / m)
ï¼4ï¼ Feeding weight ï¼400-1000(G / m)
ï¼5ï¼ Working width (mm) ï¼1000
ï¼6ï¼ Dry - ï¼60-300
ï¼7ï¼ Thorn roller diameter (mm) ï¼Φ250
ï¼8ï¼ Thorn roller speed (rpm) ï¼833 942 1025
ï¼9ï¼ Adolfo work in diameter (mm) ï¼Φ1289
ï¼10ï¼Adolfo work speed (rpm) 413 467 508
ï¼11ï¼Working cylinder diameter (mm) ï¼Φ1289
ï¼12ï¼Xilin work speed (rpm ï¼413 467 508
ï¼13ï¼Rotary Flat (Flat work / Flat total) ï¼32/86
ï¼14ï¼Flat rate (cents folds) ï¼98-367
ï¼15ï¼Additional components : Taker - carding carding plate after Flat Tops the former Flat Tops
ï¼16ï¼Apply sliver extinguishers (mm) in diameter ï¼Φ600 Φ1000
High ï¼1100
ï¼17ï¼Batch Cleaning Filtration : single box each exhaust fan about 3000 m 3 / hour the aircraft concentrated intermittent suction system.
ï¼18ï¼Compressed air pressure : 4-5 kg / sq cm
ï¼19ï¼Air consumption : 0.01 m 3 / hour
ï¼20ï¼11.04 kW total installed power
ï¼21ï¼5.5 kW main drive motor :
ï¼22ï¼Astoria drives : 2.2 kW :
ï¼23ï¼Cleaning roller motor : 0.37 kW
ï¼24ï¼Flat spent cleaning roller 0.37 kW motor
ï¼25ï¼Filtration : 2.2 kW electrical box
ï¼26ï¼Cotton to 0.4 kW motor :
ï¼27ï¼Closed Type : security enclosures
ï¼28ï¼Covers (Chang) : 4460 x 2729 (mm) (600 circle of Φ)
4659 x 3142 (mm) (Φ circle of 1000)
(29) : machinery weighing 5500kg
Yield is subject to the following factors ï¼
Of weight Out of speed Sources of raw materials Fiber fineness and length Working conditions Air conditioning Victoria adjustment
Repair Management experience.