Alumina/Ceramic Heater/Oil Burner Igniter/Innovacera

Alumina/Ceramic Heater/Oil Burner Igniter/InnovaceraMORE INFORMATIONS,PLEASE CONTACT CHARLIN(AT)INNOVACERA(DOT)COMOur ceramic heating elements consist of Al2O3 insulation ceramics with an integrated platinum conductor,and reach a permanent operation temperature of between 1000°C and 1100°C.

 

 

Structure

Internal heating elements are protected from oxidation in air due to a sintered one-piece ceramic body construction.

They are deployed in the following areas:

 

1.Heating applications above 750°C,in which standard heating cartridges would have long since failed.

2.Very precise,rapid heating due to the extremely low thermal mass

3.Efficient hot gas generation through the extremely large heat transfer surface area.

 

Our heater portfolio covers a broad performance spectrum(depending on the desired purpose)and various patented structural forms.In addition to this the heating elements can be designed on an individual customer basis and be equipped with a complete electrical connection technology.

 

Concrete applications:

1.Hot surface igniters(ignition of gas,oil ,biomass,pellets)

2.Hot air generation

3.Tool heating

4.Melting/Welting/Soldering/Hot air soldering

5.Heaters for chemical analysis and laboratory equipment(eg:min-furnaces,reactors)

6.Customer-specific heating solutions

 

Advantage:

1.Extremely fast and hot(Permanently at 1100°C,for the short term up to 1300°C)

2.Extremely energy-efficient

3.Resistant to thermal stress(rapid switching is easily tolerated)

4.Very corrosion-resistant

5.Practically non-ageing

6.Electrical contacts by means of patented high-temperature-resistant plug connector

7.Integrated temperature measurement possible by means of platinum conductor.Heater and sensor in one!

 

Highly Durable and Energy-efficient:

Ceramic Igniters for Solid Fuel Furnaces

Our special application area for the high-temperature heaters is in heating systems that use solid fuels such as wood pellets as the energy source.The challenge here is to ignite the biomass in a very short time while retaining very low emission values .This can only be achieved with a sufficiently high ignition temperature.

 

Our short surface igniters are perfectly suited for this purpose.The special geometry of the cylindrical ceramic heaters,in conbination with an extremely high surface temperature of 1000°C,heats up the supply air in the shortest possible time to an extremely high temperature.After a maximum of  90 seconds,the fuel is ignited with a fraction of the energy that is required for a hot aire of ignition blower.This works,of course,not only with pellets,but also with wood chips,firewood,coal bricks or other solid fuels made of biomass.Further product advantages:

1.Ready assembled,easy-to-install systems

2.Space-saving,noiseless and impervious to overheating (in case the blower fails)

3.Extremely long-lasting and resilient

4.Minimal energy consumption

5.Completely electrically insulated

6.No exposed electrical contacts

7.No sensitive welding points

 

Not without reason,the high temperature heating elements pellet igniter is the reliable standard ignition system for pellet heating systems in Europe-hundreds of satisfied customers speak for themselves.

FeaturesCompact / Light-Weight / Energy-Conserving
High watt density, good thermal efficiency
Laying of multiple heating elements per unit is available 

Superior Thermal Properties 
Rapid heat increase 
Custom designed temperature distribution available 
High levels of insulation allow direct contact with water, kerosene and metal 

High Reliability 
Superior dielectric strength and electrical insulation 
Longer life due to oxidation-proof design on resistivity material 
Superior chemical resistance MORE DETAILS ,PLEASE CONTACT CHARLIN(AT)INNOVACERA(DOT)COM.

 

 

 Now our Office

 

We are specialized in the technical ceramics.If you need any help about is,please don't hesitate to contact with us.

 

 

Our ceramic pellet igniter consist of Al2O3 insulation ceramics with an integrated platinum conductor,and reach a permanent operation temperature of between 1000? and 1100?.They are deployed in the following areas: 1.Heating applications above 750?,in which standard heating cartridges would have long since failed.2.Very precise,rapid heating due to the extremely low thermal mass3.Efficient hot gas generation through the extremely large heat transfer surface area. Our pellet igniter portfolio covers a broad performance spectrum(depending on the desired purpose)and various patented structural forms.In addition to this the heating elements can be designed on an individual customer basis and be equipped with a complete electrical connection technology. Concrete applications:1.Hot surface igniters(ignition of gas,oil ,biomass,pellets)2.Hot air generation3.Tool heating4.Melting/Welting/Soldering/Hot air soldering5.Heaters for chemical analysis and laboratory equipment(eg:min-furnaces,reactors)6.Customer-specific heating solutions Advantage:1.Extremely fast and hot(Permanently at 1100?,for the short term up to 1300?)2.Extremely energy-efficient3.Resistant to thermal stress(rapid switching is easily tolerated)4.Very corrosion-resistant5.Practically non-ageing6.Electrical contacts by means of patented high-temperature-resistant plug connector7.Integrated temperature measurement possible by means of platinum conductor.Heater and sensor in one!